Primary uses – advertising, menu boards, welcome messages, dish video playback.
Technical requirement derived from use case:
High refresh rate (to avoid flicker in customer photos/videos)
SMD package (for close viewing clarity)
Core parameters and selection logic:
| Parameter |
Value |
Technical Note |
| Pixel pitch |
P2.5 mm |
Optimal viewing distance: 2–8 m; balances clarity and cost |
| LED package |
SMD2020 |
Common indoor SMD; better white consistency than SMD2121, lower dead-pixel rate |
| Module size |
320×160 mm |
Industry standard; easy spare part replacement; gap ≤0.3mm |
| Cabinet size |
640×480 mm (6 modules per cabinet) |
Typical weight 8–10 kg (steel or aluminum); wall-mount or ceiling rigging |
| Pixel density |
160,000 pixels/m² |
Capable of 1080p video without visible grain (source dependent) |
| Refresh rate |
7680Hz |
Above typical 1920Hz – no black scanning lines in photos/video; suitable for livestream or social media capture |
| Signal interface |
HUB 75E |
Industry standard; allows flexible receiver card selection – avoid mixing different card brands on same panel |
| Certifications |
KC, CE, ROHS, FCC, CCC |
KC mandatory for South Korea (EMC compliance); CCC for reference in China-based production lines |
LED Screen Dimensions & Structural Notes:
Indoor LED display size: 7.2 m (W) × 4.48 m (H)
Mounting method: Indoor fixed installation.
Recommended: wall‑mount + front service access (≥0.8m rear clearance) or magnetic front‑maintenance (zero rear space).
Design of LED display screen project:
The customer's requirement for this LED display project is that the size of the LED display screen should be combined with the site, and it should be easy to install and maintain quickly. After receiving the customer's request, the HSCXLED team promptly communicated with the customer and provided a one-stop LED display solution. Considering the customer's quick installation, we adopted an indoor die cast aluminum integrated LED display, which has the advantages of easy installation and transportation.
During the communication process, we found that the customer's display screen size could not be achieved using the same size box. Our engineers adjusted it and ultimately adopted two box specifications (640 * 480mm LED display screen+640 * 320mm LED display screen). This solution was approved by the customer.
As the customer's LED display screen is installed in the hotel and adopts a wall mounted fixed installation method, if a regular indoor LED display screen is chosen, the subsequent maintenance difficulty is high. The HSCXLED team has adopted a pre maintenance LED display screen, full front maintenance mode for the screen module, and prepared LED module spare parts and maintenance tools for the customer. If there is a problem with one module of the LED display screen, it can be replaced directly. Pre maintenance LED display screen solves the problem of high maintenance costs for customers during use, and customers are very satisfied with our professionalism.
Key Quality & Process Indicators:
Indoor fixed LED display,P2.5 LED video wall,SMD surface‑mount technology,320×160mm LED module/HUB 75E interface
KC certification LED display/Retail LED screen South Korea
Supported content formats:Video / Text / Pictures / Clock / 3D Text / Office documents / SWF (Flash – legacy)
Multi‑window display (e.g., menu + video) requires a dedicated video processor or splicer.
7680Hz refresh led display
Module flatness : Factory check using 0.3 mm feeler gauge
LED wavelength uniformity : Batch‑tested to <2 nm variance
Gray level : Should be ≥14 bit
Connection torque : Module screws tightened to 0.4–0.6 N·m
Your message must be between 20-3,000 characters!
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
